INDUCTION COOKPLATE is a relatively common household appliance. It can be used for cooking, soup, and hot pot. It is very convenient, but it will break down after a long time. Automatically shut down, etc., so today I specially compiled relevant information for you, hoping to help you.
INDUCTION COOKPLATE does not heat up, what should I do?
The induction induction cooker dripping water does not generate heat. This indicates that the induction cooker is not detecting the load of the pot. The basic structure of a household induction cooker: an electromagnetic heating control panel, a sensor in the middle of the coil reel, which is glued to the glass steel plate of the induction cooker. This sensor is used to detect if the induction cooker is under load, if the maintenance period has passed, if the pan is absorbed, it will drip, the sensor should come loose, or the sensor should not stick after being dropped. Check it out or get it repaired.
INDUCTION COOKPLATE always jumps to insulation mode
Something on the board is broken. Possibly after getting wet, if hair grows in many places, the board is long and rotten. Induction cooker has been used for a long time. Because the cooking fumes are so high when cooking, the oil hangs from the control circuit board through the fan. When the time is long, the jump phenomenon occurs. If it is severe then the block will change. control Panel. Some smart induction cookers have this feature. When they reach their preset maximum temperature, they will jump into the low temperature range. When the temperature drops, they will jump into the high temperature range and be thermostatically heated within a certain range. Fourteen, no heating or intermittent heating
Sometimes we will find that the heating and cooking of the induction cooker is not very stable, sometimes the heating time is short, the problem is more difficult, the temperature detection resistor is involved, the synchronous oscillation circuit, IGBT driver, IGBTC high voltage maintenance circuit, etc. may be related to these problems. If you repair it yourself, it will cause damage to the induction cooker and send it to a professional repair shop.
Start the problem code
Many times, when people open INDUCTION COOKPLATE to use it, they will find that there are some problem codes on the display, which cannot be used normally. For these kinds of problems, first understand the meaning of the code, and then fix it. This kind of problem is usually caused by the resistance value of the large resistive body, which can be measured one by one and replaced with a variable value. Check out the transformer, 300v/5uF capacitor, thermistor and the only potentiometer in the induction cooker together. Only these places are found and these problems can usually be ruled out.
Pressing the power button does not respond
One of the problems is that the INDUCTION COOKPLATE is not responding. This kind of problem is a good fix. This is not a big problem that is hard to fix. We can fix it. Usually, the button is broken, or the button board is dirty and leaking. For this problem, simply changing the button or cleaning the button plate will solve the problem.